devices.esphome.io

Brilliant Smart WiFi Powerboard 20691/05

Brilliant Smart WiFi Powerboard 20691/05

Device Type: plug
Electrical Standard: au
Board: esp8266

The Brilliant Smart Smart WiFi Powerboard 20691 is available in Australia and New Zealand. It has four individually switched AC outlets (each has a status LED that do not seem to be individually controllable. There are also four USB power/charge ports, all switchable but not individually. There is a button and blue and red controllable leds.

GPIO Pinout

PinFunction
GPIO0Led1 (Inverted: true)
GPIO14Push Button (Inverted: true)
GPIO13Red LED (Inverted: true)
GPIO01None
GPIO02None
GPIO03Led2 (Inverted: true)
GPIO04Relay1 (Inverted: true)
GPIO05Button1
GPIO09None
GPIO10None
GPIO12Relay3 (Inverted: true)
GPIO13Relay2 (Inverted: true)
GPIO14Relay4 (Inverted: true)
GPIO15None
GPIO16Relay5

Getting up and running

I flashed this device with tuya-convert, which worked straight off. I originally flashed with tasmota, then upgraded to esphome :)

Code

This yaml is borrowed from the author of the Arlec PB89HA Power Board page. The multi click stuff for the button is optional, but can be useful if you are at the powerboard.

The blue led is used as a status led and flashes as the wifi is connecting. The red led is switchable and could be used for some sort of status indicator.

esphome:
  name: multibox


esp8266:
  board: esp01_1m


wifi:
  ssid: "**"
  password: "**"
  domain: ".**"


  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Multibox Fallback Hotspot"
    password: "**"


captive_portal:


# Enable logging
logger:


# Enable Home Assistant API
api:
  encryption:
    key: !secret api_encryption_key


ota:
  password: "**"


sensor:
  - platform: uptime
    name: Multibox Uptime


  - platform: wifi_signal
    name: Multibox Signal
    update_interval: 300s


switch:
  - platform: gpio
    pin:
      number: GPIO04
      inverted: yes
    name: "Mulltibox - A"
    id: relay_a
    restore_mode: always off
    icon: mdi:power-socket-au


  - platform: gpio
    pin:
      number: GPIO13
      inverted: yes
    name: "Mulltibox - B"
    id: relay_b
    restore_mode: always off
    icon: mdi:power-socket-au


  - platform: gpio
    pin:
      number: GPIO12
      inverted: yes
    name: "Mulltibox - C"
    id: relay_c
    restore_mode: always off
    icon: mdi:power-socket-au


  - platform: gpio
    pin:
      number: GPIO14
      inverted: yes
    name: "Mulltibox - D"
    id: relay_d
    restore_mode: always off
    icon: mdi:power-socket-au


  - platform: gpio
    pin:
      number: GPIO16
      inverted: no
    name: "Mulltibox - USB"
    id: relay_u
    restore_mode: always off
    icon: mdi:usb


status_led:
  pin:
    number: GPIO0
    inverted: True


binary_sensor:
  - platform: gpio
    pin:
      number: GPIO5
      inverted: True
    name: Multibox button
    internal: true
    on_multi_click:
      - timing:
          - ON for at most 0.5s
          - OFF for at least 0.5s
        then:
          lambda: |-
            if (! id(relay_a).state  ) {
              id(relay_a).turn_on();
            } else if ( ! id(relay_b).state ) {
              id(relay_b).turn_on();
            } else if ( ! id(relay_c).state ) {
              id(relay_c).turn_on();
            } else if ( ! id(relay_d).state ) {
              id(relay_d).turn_on();
            } else {
              id(relay_a).turn_off();
              id(relay_b).turn_off();
              id(relay_c).turn_off();
              id(relay_d).turn_off();
            }
      - timing:
          - ON for at most 0.5s
          - OFF for at most 0.5s
          - ON for at most 0.5s
          - OFF for at least 0.2s
        then:
          lambda: |-
            if ( id(relay_a).state  ) {
              id(relay_a).turn_off();
            } else if (  id(relay_b).state ) {
              id(relay_b).turn_off();
            } else if (  id(relay_c).state ) {
              id(relay_c).turn_off();
            } else if (  id(relay_d).state ) {
              id(relay_d).turn_off();
            } else {
              id(relay_a).turn_on();
              id(relay_b).turn_on();
              id(relay_c).turn_on();
              id(relay_d).turn_on();
            }
      - timing:
          - ON for at least 0.5s
          - OFF for at least 0.2s
        then:
          lambda: |-
            if (id(relay_a).state ||
            id(relay_b).state ||
            id(relay_c).state ||
            id(relay_d).state ) {
              id(relay_a).turn_off();
              id(relay_b).turn_off();
              id(relay_c).turn_off();
              id(relay_d).turn_off();
            } else {
              id(relay_a).turn_on();
              id(relay_b).turn_on();
              id(relay_c).turn_on();
              id(relay_d).turn_on();
            }


light:
  - platform: binary
    name: "Multibox Red LED"
    output: output_component1


output:
  - platform: gpio
    pin:
      number: GPIO3
      inverted: yes
    id: output_component1
Edit this page on GitHub

On this page