devices.esphome.io

JDONG X6060-450 ceiling light

JDONG X6060-450 ceiling light

Device Type: light
Electrical Standard: eu
Board: bk72xx
Difficulty: Plug-n-flash, 2/5

Device

  • Sold in Germany, e.g., by Kaufland.
  • Board inside is WB3S (BK7231T) and ESPHome can be flashed with tuya-cloudcutter.
  • ESPHome support for the IR remote control currently unknown (as no access to a remote).

JDONG X6060 board

Basic Configuration

substitutions:
  device_name: "jdong-rgbww-light"
  friendly_name: "JDONG X4040"
  project_name: "jdong.rgbww-light"
  project_version: "1.0"


esphome:
  name: "${device_name}"
  name_add_mac_suffix: true
  project:
    name: "${project_name}"
    version: "${project_version}"
  on_boot:
    priority: 600
    then:
      - light.turn_on:
          id: light_rgbww
          brightness: 100%
          color_temperature: 4000K


bk72xx:
  board: wb3s


logger:


web_server:


captive_portal:


mdns:


api:
  password: ""


ota:
  platform: esphome
  password: ""


wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  ap:


text_sensor:
  - platform: libretiny
    version:
      name: LibreTiny Version
  - platform: wifi_info
    ip_address:
      name: "${friendly_name} IP Address"


binary_sensor:
  - platform: status
    name: "${friendly_name} Status"


sensor:
  - platform: uptime
    type: seconds
    name: "${friendly_name} Uptime Sensor"


output:
  - platform: libretiny_pwm
    id: output_red
    pin: P8
  - platform: libretiny_pwm
    id: output_green
    pin: P9
  - platform: libretiny_pwm
    id: output_blue
    pin: P7
  - platform: libretiny_pwm
    id: output_cold
    pin: P6
  - platform: libretiny_pwm
    id: output_warm
    pin: P24


light:
  - platform: rgbww
    id: light_rgbww
    name: "${friendly_name}"
    color_interlock: true
    cold_white_color_temperature: 6500 K
    warm_white_color_temperature: 2700 K
    red: output_red
    green: output_green
    blue: output_blue
    cold_white: output_cold
    warm_white: output_warm


remote_receiver:
  pin:
    number: P1
    inverted: true
    mode: INPUT_PULLUP
Edit this page on GitHub

On this page