devices.esphome.io

Sonoff POWR2

Sonoff POWR2

Device Type: relay
Electrical Standard: global
Board: esp8266
Difficulty: Disassembly required, 3/5

Product Images

A picture of the PCB inside of the Sonoff POWR2

GPIO Pinout

PinFunction
GPIO0Push Button (HIGH = off, LOW = on)
GPIO12Relay and its status LED
GPIO13Blue LED (HIGH = off, LOW = on)
GPIO1RX pin (for serial programming)
GPIO3TX pin (for serial programming)

Basic Configuration

As the only controllable LED is the Blue LED, it is configured here to use the status_led light component, which will take over the LED in the event of a error/warning state, such as when WiFi is disrupted.

# Basic Config
substitutions:
  update_interval: 60s
  name: "sonoff-pow-r2"
  ota_password: "your_ota_password_here"


esphome:
  name: "${name}"


esp8266:
  board: esp01_1m


logger:
  baud_rate: 0


# Enable Home Assistant API
api:


ota:
  - platform: esphome
    password: "${ota_password}"


wifi:
  networks:
    - ssid: !secret wifi_ssid
      password: !secret wifi_password


uart:
  rx_pin: RX
  baud_rate: 4800
  parity: EVEN


binary_sensor:
  - platform: gpio
    pin:
      number: GPIO0
      mode: INPUT_PULLUP
      inverted: True
    name: Sonoff POW Button
    on_press:
      - switch.toggle: dummybutton


sensor:
  - platform: cse7766
    current:
      name: "Sonoff Pow R2 Current"
      filters:
        - throttle_average: ${update_interval}
    voltage:
      name: "Sonoff Pow R2 Voltage"
      filters:
        - throttle_average: ${update_interval}
    power:
      name: "Sonoff Pow R2 Power"
      filters:
        - throttle_average: ${update_interval}
    energy:
      name: "Sonoff Pow R2 Energy"
      filters:
        - throttle: ${update_interval}
    apparent_power:
      name: "Sonoff Pow R2 Apparent Power"
      filters:
        - throttle_average: ${update_interval}
    power_factor:
      name: "Sonoff Pow R2 Power Factor"
      filters:
        - throttle_average: ${update_interval}


switch:
  - platform: template
    name: Sonoff POW Relay
    optimistic: true
    id: dummybutton
    turn_on_action:
      - switch.turn_on: relay
    turn_off_action:
      - switch.turn_off: relay
  - platform: gpio
    id: relay
    pin: GPIO12


light:
  - platform: status_led
    name: Sonoff POW Blue LED
    id: pow_blue_led
    pin:
        number: GPIO13
        inverted: True
Edit this page on GitHub

On this page