devices.esphome.io

Sonoff TH10/TH16

Sonoff TH10/TH16

Device Type: relay
Electrical Standard: global
Board: esp8266

Information

The Sonoff TH10 and TH16 are 10A/16A smart WiFi switches with optional temperature and humidity monitoring.

GPIO Pinout

PinFunction
GPIO0Push Button (HIGH = off, LOW = on)
GPIO12Relay and Red LED
GPIO13Blue Status LED
GPIO14Sensor

Basic Configuration

The following configuration also contains commented lines for adding a 1-Wire sensor via the 2.5 mm jack.

# These substitutions allow for easy renaming
substitutions:
  name: "sonoff-th1X"
  friendly_name: "Sonoff TH1X"


# Basic Config
esphome:
  name: "${name}"
  friendly_name: "${friendly_name}"
  esp8266:
    board: esp01_1m


# Enable logging
logger:


# Enable Home Assistant API
api:


# Enable the web server
web_server:


# Enable over-the-air updates
ota:
  platform: esphome


# Wifi Setup
wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password


# One-Wire for 2.5mm jack sensors
# one_wire:
# - platform: gpio
# pin: GPIO14


sensor:
  - platform: wifi_signal
    name: "WiFi Signal"
    update_interval: 60s
# Example setup for a DS18B20
# - platform: dallas_temp
#   name: temperature
#   update_interval: 120s


binary_sensor:
  - platform: gpio
    pin:
      number: GPIO0
      mode: INPUT_PULLUP
      inverted: True
    name: "Button"
    on_press:
      - light.toggle: th1x_relay
  - platform: status
    name: "$Status"


switch:
  - platform: restart
    name: "$Restart"


output:
  - platform: esp8266_pwm
    id: blue_led
    pin:
      number: GPIO13
      inverted: True


  - platform: gpio
    id: relay
    pin: GPIO12


light:
  - platform: monochromatic
    name: "$Blue LED"
    id: blue_led
    restore_mode: RESTORE_DEFAULT_OFF
    output: blue_led
  - platform: binary
    name: "Relay"
    id: th1x_relay
    output: relay
Edit this page on GitHub

On this page